Configurar um balanceador de carga de rede interno avaliações

BIJU A. · Revisado há about 3 years

Carly S. · Revisado há about 3 years

Giuliano B. · Revisado há about 3 years

the lab is misleading, if you follow the lab it will be red flag to qwiklabs, running the startup script in Task3 after enabling the firewall rules will push the CPU utilization over 80% and qwiklabs will end the lab thinking you are provisioning new VMs, but the VMs are provisioned because in the instance group there is autoscalaer on CPU utilization, the only way I found is to add NAT first then run the startup scripts then enable firewall rules, i.e: Task 2 -> Task 3 -> Task 1 -> Task 4 -> Task 5

Maher A. · Revisado há about 3 years

Zaid S. · Revisado há about 3 years

Jason D. · Revisado há about 3 years

José I G. · Revisado há about 3 years

Matias Hernan H. · Revisado há about 3 years

dhanunjaya b. · Revisado há about 3 years

Jason D. · Revisado há about 3 years

Karnakota M. · Revisado há about 3 years

Hafiz G. · Revisado há about 3 years

Good

sindhuja a. · Revisado há about 3 years

Admiral W. · Revisado há about 3 years

Tanay M. · Revisado há about 3 years

Ricardo Jorge A. · Revisado há about 3 years

Deepak P. · Revisado há about 3 years

sumanth s. · Revisado há about 3 years

Devika E. · Revisado há about 3 years

YUNUS B. · Revisado há about 3 years

Victor Manuel A. · Revisado há about 3 years

Tirthankar B. · Revisado há about 3 years

Inderjeet K. · Revisado há about 3 years

Yutheeshkumar U. · Revisado há about 3 years

Aishwarya R. · Revisado há about 3 years