Відгуки: Configuring Google Kubernetes Engine (GKE) Networking

UI from the instructions appears to be out of date. Namely, there is no option for Control Plane IP Range under Private Cluster

JAXON P. · Відгук надано більше 1 року тому

There is a difference between the actual GCP configuration and the one presented here in the training instructions. The training materials need updating to account for the new configuration changes.

Tchinsala Y. · Відгук надано більше 1 року тому

ChiHieu N. · Відгук надано більше 1 року тому

grader not working!!!!!!

Tomas V. · Відгук надано більше 1 року тому

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested. On the second attempt, I realized I could move past this even though the initial progress check failed so I was at least able to complete it.

Linden F. · Відгук надано більше 1 року тому

Instructions did not match for Task 1.

ABHAY S. · Відгук надано більше 1 року тому

Step 8 of creating a private cluster did not work and I was unable to add a network address

Lee B. · Відгук надано більше 1 року тому

In the Lab you are required to set Control plane IP range. This is not available in the console. I had to create the cluster using cloud shell and --master-ipv4-cidr 172.16.0.0/28

Stanislav M. · Відгук надано більше 1 року тому

Lab is outdated, there are no inputs for the cluster on some of the settings that you are trying to make me configure.

Kevin S. · Відгук надано більше 1 року тому

grader not working!!!!

Tomas V. · Відгук надано більше 1 року тому

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Відгук надано більше 1 року тому

cannot select control plane ip range

ERIC E. · Відгук надано більше 1 року тому

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Відгук надано більше 1 року тому

Thirulokachandar N. · Відгук надано більше 1 року тому

RIKI M. · Відгук надано більше 1 року тому

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested.

Linden F. · Відгук надано більше 1 року тому

Lab only worked once i used command line to create cluster overriding the control plane IP range.

RICHARD P. · Відгук надано більше 1 року тому

Step to setup control plane IP range not present in UI

RICHARD P. · Відгук надано більше 1 року тому

Cluster IP Address range isn't available for newest GKE versions which made this lab very confusing. I had to change to 1.27

Michael C. · Відгук надано більше 1 року тому

Bhavani D. · Відгук надано більше 1 року тому

I would give this lab a 0 if I could. Building cluster you have no way to provide control plan ip range . the first check fails. i have tried lab 5 times and same each time. This lab is broken

Andrew C. · Відгук надано більше 1 року тому

Antonio J. · Відгук надано більше 1 року тому

Error on Task 1. Create a private cluster Step 8 GUI does not have the option to insert the IP, need be created using shell: gcloud container clusters create private-cluster \ --location us-east4-b \ --create-subnetwork name=my-subnet-gke \ --enable-master-authorized-networks \ --enable-ip-alias \ --enable-private-nodes \ --master-ipv4-cidr 172.16.0.0/28 Source where found the hint: https://cloud.google.com/kubernetes-engine/docs/how-to/private-clusters?hl=pt-br#gke_private_clusters_1- https://cloud.google.com/sdk/gcloud/reference/container/clusters/create#--node-locations Error on Task 3. Create a cluster network policy Step4: ERROR: (gcloud.container.clusters.create) ResponseError: code=403, message=Insufficient regional quota to satisfy request: resource "SSD_TOTAL_GB": request requires '300.0' and is short '100.0'. project has a quota of '500.0' with '200.0' available. View and manage quotas at https://console.cloud.google.com/iam-admin/quotas?usage=USED&project=qwiklabs-gcp-02-3625927f453b. This command is authenticated as student-00-237c1b03f2f5@qwiklabs.net which is the active account specified by the [core/account] property. Need use regular disk instead SSD to work: gcloud container clusters create $my_cluster --num-nodes 3 --enable-ip-alias --zone $my_zone --enable-network-policy --disk-type pd-standard Source where found the hint: https://stackoverflow.com/questions/74836213/error-403-insufficient-regional-quota-to-satisfy-request-resource-ssd-total

Alexandre Fernandes P. · Відгук надано більше 1 року тому

Step to setup control plane IP range not present in UI

RICHARD P. · Відгук надано більше 1 року тому

Step to setup control plane IP range not present in UI

RICHARD P. · Відгук надано більше 1 року тому