리뷰 Google Kubernetes Engine(GKE) 네트워킹 구성개

ChiHieu N. · 대략 1년 전에 리뷰됨

grader not working!!!!!!

Tomas V. · 대략 1년 전에 리뷰됨

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested. On the second attempt, I realized I could move past this even though the initial progress check failed so I was at least able to complete it.

Linden F. · 대략 1년 전에 리뷰됨

Instructions did not match for Task 1.

ABHAY S. · 대략 1년 전에 리뷰됨

Step 8 of creating a private cluster did not work and I was unable to add a network address

Lee B. · 대략 1년 전에 리뷰됨

In the Lab you are required to set Control plane IP range. This is not available in the console. I had to create the cluster using cloud shell and --master-ipv4-cidr 172.16.0.0/28

Stanislav M. · 대략 1년 전에 리뷰됨

Lab is outdated, there are no inputs for the cluster on some of the settings that you are trying to make me configure.

Kevin S. · 대략 1년 전에 리뷰됨

grader not working!!!!

Tomas V. · 대략 1년 전에 리뷰됨

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · 대략 1년 전에 리뷰됨

cannot select control plane ip range

ERIC E. · 대략 1년 전에 리뷰됨

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · 대략 1년 전에 리뷰됨

Thirulokachandar N. · 대략 1년 전에 리뷰됨

RIKI M. · 대략 1년 전에 리뷰됨

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested.

Linden F. · 대략 1년 전에 리뷰됨

Lab only worked once i used command line to create cluster overriding the control plane IP range.

RICHARD P. · 대략 1년 전에 리뷰됨

Step to setup control plane IP range not present in UI

RICHARD P. · 대략 1년 전에 리뷰됨

Cluster IP Address range isn't available for newest GKE versions which made this lab very confusing. I had to change to 1.27

Michael C. · 대략 1년 전에 리뷰됨

Bhavani D. · 대략 1년 전에 리뷰됨

I would give this lab a 0 if I could. Building cluster you have no way to provide control plan ip range . the first check fails. i have tried lab 5 times and same each time. This lab is broken

Andrew C. · 대략 1년 전에 리뷰됨

Antonio J. · 대략 1년 전에 리뷰됨

Error on Task 1. Create a private cluster Step 8 GUI does not have the option to insert the IP, need be created using shell: gcloud container clusters create private-cluster \ --location us-east4-b \ --create-subnetwork name=my-subnet-gke \ --enable-master-authorized-networks \ --enable-ip-alias \ --enable-private-nodes \ --master-ipv4-cidr 172.16.0.0/28 Source where found the hint: https://cloud.google.com/kubernetes-engine/docs/how-to/private-clusters?hl=pt-br#gke_private_clusters_1- https://cloud.google.com/sdk/gcloud/reference/container/clusters/create#--node-locations Error on Task 3. Create a cluster network policy Step4: ERROR: (gcloud.container.clusters.create) ResponseError: code=403, message=Insufficient regional quota to satisfy request: resource "SSD_TOTAL_GB": request requires '300.0' and is short '100.0'. project has a quota of '500.0' with '200.0' available. View and manage quotas at https://console.cloud.google.com/iam-admin/quotas?usage=USED&project=qwiklabs-gcp-02-3625927f453b. This command is authenticated as student-00-237c1b03f2f5@qwiklabs.net which is the active account specified by the [core/account] property. Need use regular disk instead SSD to work: gcloud container clusters create $my_cluster --num-nodes 3 --enable-ip-alias --zone $my_zone --enable-network-policy --disk-type pd-standard Source where found the hint: https://stackoverflow.com/questions/74836213/error-403-insufficient-regional-quota-to-satisfy-request-resource-ssd-total

Alexandre Fernandes P. · 대략 1년 전에 리뷰됨

Step to setup control plane IP range not present in UI

RICHARD P. · 대략 1년 전에 리뷰됨

Step to setup control plane IP range not present in UI

RICHARD P. · 대략 1년 전에 리뷰됨

Olivier B. · 대략 1년 전에 리뷰됨

Diwakar K. · 대략 1년 전에 리뷰됨