Configurare il networking di Google Kubernetes Engine (GKE) recensioni

grader not working!!!!!!

Tomas V. · Recensione inserita circa un anno fa

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested. On the second attempt, I realized I could move past this even though the initial progress check failed so I was at least able to complete it.

Linden F. · Recensione inserita circa un anno fa

Instructions did not match for Task 1.

ABHAY S. · Recensione inserita circa un anno fa

Step 8 of creating a private cluster did not work and I was unable to add a network address

Lee B. · Recensione inserita circa un anno fa

In the Lab you are required to set Control plane IP range. This is not available in the console. I had to create the cluster using cloud shell and --master-ipv4-cidr 172.16.0.0/28

Stanislav M. · Recensione inserita circa un anno fa

Lab is outdated, there are no inputs for the cluster on some of the settings that you are trying to make me configure.

Kevin S. · Recensione inserita circa un anno fa

grader not working!!!!

Tomas V. · Recensione inserita circa un anno fa

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Recensione inserita circa un anno fa

cannot select control plane ip range

ERIC E. · Recensione inserita circa un anno fa

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Recensione inserita circa un anno fa

Thirulokachandar N. · Recensione inserita circa un anno fa

RIKI M. · Recensione inserita circa un anno fa

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested.

Linden F. · Recensione inserita circa un anno fa

Lab only worked once i used command line to create cluster overriding the control plane IP range.

RICHARD P. · Recensione inserita circa un anno fa

Step to setup control plane IP range not present in UI

RICHARD P. · Recensione inserita circa un anno fa

Cluster IP Address range isn't available for newest GKE versions which made this lab very confusing. I had to change to 1.27

Michael C. · Recensione inserita circa un anno fa

Bhavani D. · Recensione inserita circa un anno fa

I would give this lab a 0 if I could. Building cluster you have no way to provide control plan ip range . the first check fails. i have tried lab 5 times and same each time. This lab is broken

Andrew C. · Recensione inserita circa un anno fa

Antonio J. · Recensione inserita circa un anno fa

Error on Task 1. Create a private cluster Step 8 GUI does not have the option to insert the IP, need be created using shell: gcloud container clusters create private-cluster \ --location us-east4-b \ --create-subnetwork name=my-subnet-gke \ --enable-master-authorized-networks \ --enable-ip-alias \ --enable-private-nodes \ --master-ipv4-cidr 172.16.0.0/28 Source where found the hint: https://cloud.google.com/kubernetes-engine/docs/how-to/private-clusters?hl=pt-br#gke_private_clusters_1- https://cloud.google.com/sdk/gcloud/reference/container/clusters/create#--node-locations Error on Task 3. Create a cluster network policy Step4: ERROR: (gcloud.container.clusters.create) ResponseError: code=403, message=Insufficient regional quota to satisfy request: resource "SSD_TOTAL_GB": request requires '300.0' and is short '100.0'. project has a quota of '500.0' with '200.0' available. View and manage quotas at https://console.cloud.google.com/iam-admin/quotas?usage=USED&project=qwiklabs-gcp-02-3625927f453b. This command is authenticated as student-00-237c1b03f2f5@qwiklabs.net which is the active account specified by the [core/account] property. Need use regular disk instead SSD to work: gcloud container clusters create $my_cluster --num-nodes 3 --enable-ip-alias --zone $my_zone --enable-network-policy --disk-type pd-standard Source where found the hint: https://stackoverflow.com/questions/74836213/error-403-insufficient-regional-quota-to-satisfy-request-resource-ssd-total

Alexandre Fernandes P. · Recensione inserita circa un anno fa

Step to setup control plane IP range not present in UI

RICHARD P. · Recensione inserita circa un anno fa

Step to setup control plane IP range not present in UI

RICHARD P. · Recensione inserita circa un anno fa

Olivier B. · Recensione inserita circa un anno fa

Diwakar K. · Recensione inserita circa un anno fa

Sree Harene S. · Recensione inserita circa un anno fa