关于“Hosting WordPress Using Amazon S3”的评价

Alex B. · 已于 about 8 years前审核

Raghu M. · 已于 about 8 years前审核

Dheeraj S. · 已于 about 8 years前审核

Ashwin B. · 已于 about 8 years前审核

Andrew K. · 已于 about 8 years前审核

Manuel T. · 已于 about 8 years前审核

Venkata D. · 已于 about 8 years前审核

Had trouble with the PublicIP provided and the PPK

Kirby D. · 已于 about 8 years前审核

Could not complete step 31. The PuTTY Security Alert dialog box did not open. Message: Network error: Connection timed out

Jeff S. · 已于 about 8 years前审核

Rahul M. · 已于 about 8 years前审核

Ok

Robert J. · 已于 about 8 years前审核

Ali M. · 已于 about 8 years前审核

Could not find wordpressurl

sapn k. · 已于 about 8 years前审核

SHIGERU N. · 已于 about 8 years前审核

52.39.125.95 was my public ip and I was not able to connect with Linux or Windows getting connection time out message.

Atul S. · 已于 about 8 years前审核

This lab was not able to be done on my work network. I had to scramble for another pc in the middle of the lab and find another off-work network to connect to so that I could use putty. Which i didn't want to use since I use a mac for everyday work, but I didn't have another mac so I grabbed a windows pc. In doing this I couldn't cut and paste as the lab instructed to do to put commands into the ssh window. I could have typed them out if it was easier to see the whole command instead of it being in the little scrolling window. So I copied the commands to a text file on my mac, to usb drive, to windows pc. Then I was able to cut and paste commands. I was able to get to the static endpoint and see the site, but then as the lab says I went to the wordpress page and made another blog entry and when I tried to go back to the page, once again on the web pc because the aws page it blocked on my work network, I was no longer able to see the blog photo, the formatting of the page was all gone, and the page looked like junk. I did see where it said second blog entry for my title so I know at least that the job copied over, but it looked like junk. I gave it time, another 5 minutes but nothing changed. There should have been some sort of warning that you need to get to s3 on your work network before starting the lab and I may have done it off network before starting it and being charged for it rather than finding that out half way through the lab. If it was listed somewhere, it should be made more prominent on the page before starting the lab, maybe a pop up.

Thomas O. · 已于 about 8 years前审核

Steven P. · 已于 about 8 years前审核

Mike S. · 已于 about 8 years前审核

Joseph S. · 已于 about 8 years前审核

you have two section 5

Jeff C. · 已于 about 8 years前审核

I cannot connect to putty behind my office network/firewall

Arul selvan L. · 已于 about 8 years前审核

Could not connect with putty... got an network connection error

Steve W. · 已于 about 8 years前审核

My Putty page disconnected several times.

Stefan G. · 已于 about 8 years前审核

Brian B. · 已于 about 8 years前审核

Pavlo S. · 已于 about 8 years前审核