리뷰 Google Cloud 기초: Deployment Manager와 Cloud Monitoring 시작하기개

excellent

Mustafa S. · 거의 6년 전에 리뷰됨

Bhargavi C. · 거의 6년 전에 리뷰됨

sparsh n. · 거의 6년 전에 리뷰됨

Glenn A. · 거의 6년 전에 리뷰됨

Marcel D. · 거의 6년 전에 리뷰됨

Nandhakumar N. · 거의 6년 전에 리뷰됨

tttthanks

mostafa 3. · 거의 6년 전에 리뷰됨

The logging tool failed to install (cut/paste failure below): Setting up google-fluentd (1.8.4-1) ... Conffile /etc/google-fluentd/google-fluentd.conf has been modified. Remain untouched. Job for google-fluentd.service failed because the control process exited with error code. See "systemctl status google-fluentd.service" and "journalctl -xe" for details. invoke-rc.d: initscript google-fluentd, action "start" failed. ● google-fluentd.service - LSB: data collector for Treasure Data Loaded: loaded (/etc/init.d/google-fluentd; generated; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-12-01 13:42:35 UTC; 17ms ago Docs: man:systemd-sysv-generator(8) Process: 3525 ExecStart=/etc/init.d/google-fluentd start (code=exited, status=1/FAILURE) Dec 01 13:42:35 my-vm google-fluentd[3525]: from /opt/google-fluentd/embedded/lib/ruby/gems/2.6.0/g…ired)>' Dec 01 13:42:35 my-vm google-fluentd[3525]: from /opt/google-fluentd/embedded/bin/fluentd:23:in `load' Dec 01 13:42:35 my-vm google-fluentd[3525]: from /opt/google-fluentd/embedded/bin/fluentd:23:in `<t…ired)>' Dec 01 13:42:35 my-vm google-fluentd[3525]: from /usr/sbin/google-fluentd:7:in `load' Dec 01 13:42:35 my-vm google-fluentd[3525]: from /usr/sbin/google-fluentd:7:in `<main>' Dec 01 13:42:35 my-vm systemd[1]: google-fluentd.service: Control process exited, code=exited status=1 Dec 01 13:42:35 my-vm google-fluentd[3525]: google-fluentd ... failed! Dec 01 13:42:35 my-vm systemd[1]: Failed to start LSB: data collector for Treasure Data. Dec 01 13:42:35 my-vm systemd[1]: google-fluentd.service: Unit entered failed state. Dec 01 13:42:35 my-vm systemd[1]: google-fluentd.service: Failed with result 'exit-code'. Hint: Some lines were ellipsized, use -l to show in full. dpkg: error processing package google-fluentd (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of google-fluentd-catch-all-config: google-fluentd-catch-all-config depends on google-fluentd (>= 1.3.0); however: Package google-fluentd is not configured yet. dpkg: error processing package google-fluentd-catch-all-config (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: google-fluentd google-fluentd-catch-all-config E: Sub-process /usr/bin/dpkg returned an error code (1) Job for google-fluentd.service failed because the control process exited with error code. See "systemctl status google-fluentd.service" and "journalctl -xe" for details. ============================================================================== Errors occurred while installing google-fluentd-1.8.4-1. See the log snippet above or run: sudo service google-fluentd status ==============================================================================

Kevin G. · 거의 6년 전에 리뷰됨

You didn't specify which CPU Usage and there are at least 3 different metrics.

Diego D. · 거의 6년 전에 리뷰됨

sparsh n. · 거의 6년 전에 리뷰됨

Sanyam B. · 거의 6년 전에 리뷰됨

GAURAV Y. · 거의 6년 전에 리뷰됨

Task 5 returns error in VM when installing agents: dpkg: error processing package google-fluentd (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of google-fluentd-catch-all-config: google-fluentd-catch-all-config depends on google-fluentd (>= 1.3.0); however: Package google-fluentd is not configured yet. dpkg: error processing package google-fluentd-catch-all-config (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: google-fluentd google-fluentd-catch-all-config E: Sub-process /usr/bin/dpkg returned an error code (1)

Yannick W. · 거의 6년 전에 리뷰됨

SHAYANI D. · 거의 6년 전에 리뷰됨

ANTONIO L. · 거의 6년 전에 리뷰됨

Task 5 is wrong specified

Stefania A. · 거의 6년 전에 리뷰됨

Unfortunately fluentd was not working: Setting up google-fluentd (1.8.4-1) ... Conffile /etc/google-fluentd/google-fluentd.conf has been modified. Remain untouched. Job for google-fluentd.service failed because the control process exited with error code. See "systemctl status google-fluentd.service" and "journalctl -xe" for details. invoke-rc.d: initscript google-fluentd, action "start" failed. ● google-fluentd.service - LSB: data collector for Treasure Data Loaded: loaded (/etc/init.d/google-fluentd; generated; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-12-01 13:24:41 UTC; 10ms ago Docs: man:systemd-sysv-generator(8) Process: 3939 ExecStart=/etc/init.d/google-fluentd start (code=exited, status=1/FAILURE)

Marcelo E. · 거의 6년 전에 리뷰됨

Ranusha P. · 거의 6년 전에 리뷰됨

Haruki K. · 거의 6년 전에 리뷰됨

Janaki Ramayya Chowdary C. · 거의 6년 전에 리뷰됨

Aparma A. · 거의 6년 전에 리뷰됨

SHAYANI D. · 거의 6년 전에 리뷰됨

Pankaj S. · 거의 6년 전에 리뷰됨

Khaled M. · 거의 6년 전에 리뷰됨

Ivo Z. · 거의 6년 전에 리뷰됨