Como configurar uma rede no Google Kubernetes Engine (GKE) avaliações

need to be updated

ahmed a. · Revisado há over 1 year

Enrique G. · Revisado há over 1 year

Thirulokachandar N. · Revisado há over 1 year

Котик М. · Revisado há over 1 year

UI from the instructions appears to be out of date. Namely, there is no option for Control Plane IP Range under Private Cluster

JAXON P. · Revisado há over 1 year

There is a difference between the actual GCP configuration and the one presented here in the training instructions. The training materials need updating to account for the new configuration changes.

Tchinsala Y. · Revisado há over 1 year

ChiHieu N. · Revisado há over 1 year

grader not working!!!!!!

Tomas V. · Revisado há over 1 year

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested. On the second attempt, I realized I could move past this even though the initial progress check failed so I was at least able to complete it.

Linden F. · Revisado há over 1 year

Instructions did not match for Task 1.

ABHAY S. · Revisado há over 1 year

Step 8 of creating a private cluster did not work and I was unable to add a network address

Lee B. · Revisado há over 1 year

In the Lab you are required to set Control plane IP range. This is not available in the console. I had to create the cluster using cloud shell and --master-ipv4-cidr 172.16.0.0/28

Stanislav M. · Revisado há over 1 year

Lab is outdated, there are no inputs for the cluster on some of the settings that you are trying to make me configure.

Kevin S. · Revisado há over 1 year

grader not working!!!!

Tomas V. · Revisado há over 1 year

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Revisado há over 1 year

cannot select control plane ip range

ERIC E. · Revisado há over 1 year

The instructions are not accurate. I cannot find the option to set the IP range as described in task 1

Tomas V. · Revisado há over 1 year

Thirulokachandar N. · Revisado há over 1 year

RIKI M. · Revisado há over 1 year

On my first attempt, I was not able to create the private cluster as the instructions described. The option to set the control plane network did not allow me in put a subnet range as it suggested.

Linden F. · Revisado há over 1 year

Lab only worked once i used command line to create cluster overriding the control plane IP range.

RICHARD P. · Revisado há over 1 year

Step to setup control plane IP range not present in UI

RICHARD P. · Revisado há over 1 year

Cluster IP Address range isn't available for newest GKE versions which made this lab very confusing. I had to change to 1.27

Michael C. · Revisado há over 1 year

Bhavani D. · Revisado há over 1 year

I would give this lab a 0 if I could. Building cluster you have no way to provide control plan ip range . the first check fails. i have tried lab 5 times and same each time. This lab is broken

Andrew C. · Revisado há over 1 year